"Your source for all your sealing needs since 1981."

Toll Free | 866.907.3129

P: 214.304.7103 | F: 214.503.9990

 



 

 

 

 

 

 
Home > Pneumatic Seals > Piston > Simrit
 

Simrit Pneumatic Piston Seals

If you need assistance please click on the link and complete the form provided or contact one of customer services representatives who are ready and available to assist you with your Request For Quotation, Order Processing-Fulfillment, or assist you with material-seal recommendations.

Please call us at (866) 907-3129 for more information or assistance.

Click each link below to expand the corresponding Product Information.

  • NADUOP SIMRIT Complete Pneumatic Piston Seal

    Compact piston with steel body bonded to buffers and sealing lips with special pneumatic sealing edges. Ready to install, double acting, complete piston with integral guide. Bonded buffers for end-position damping of piston in the cylinder. Radial air relief passages ensure pressure distribution at the end of stroke.

    Technical Data

    Pressure Speed Temperature
    150 PSI / 1 MPa 3 ft/s
    1 m/s
    -20 °C to 100 °C
    -4 °F to 212 °F

    Applications

    • pneumatic applications
    • complete piston assembly
  • NAP 210 SIMRIT Pneumatic U-Cup Piston Seal

    The NAP 210 is a compact u-cup with asymmetrical profile and special pneumatic sealing edge on the dynamic sealing lip. The asymmetric profile with the longer and thicker static sealing lip guarantees a secure seat in the groove base. The special pneumatic sealing edge provides a very good seal with low friction and maintains an effective lubrication film.

    Technical Data

    Pressure Speed Temperature
    175 PSI / 1.2 MPa 3 ft/s
    1 m/s
    -25 °C to 100 °C
    -13 °F to 212 °F

    Applications

    • pneumatic applications
  • TDUO P SIMRIT Complete Pneumatic Piston Seal

    Complete compact piston with steel body and bonded to sealing lips with special pneumatic sealing edges. Ready to install, double acting, pressurized complete piston with integral guide. Easily assembled on the piston rod without additional sealing elements. The design with radial air relief passages on the front face facilitates reliable pressure distribution at the end of the stroke.

    Technical Data

    Pressure Speed Temperature
    175 PSI / 1.2 MPa 3 ft/s
    1 m/s
    -20 °C to 100 °C
    -4 °F to 212 °F

    Applications

    • pneumatic applications
    • complete piston assembly

    Complete compact piston with steel body and bonded to sealing lips with special pneumatic sealing edges. Ready to install, double acting, pressurized complete piston with integral guide. Easily assembled on the piston rod without additional sealing elements. The design with radial air relief passages on the front face facilitates reliable pressure distribution at the end of the stroke.

    • long working life
    • constantly good sealing behavior over a wide pressure area (up to 1.2 MPa/175 PSI)
    • Easy fixing to piston rod
    • simple provisioning
    2017 All Rights Reserved.  Industrial Seal, Inc. 10460 Markison Road Dallas, Texas 75238 Tel: (866) 907-3129 Fax: (214) 503-9990 | Parker | Simrit | Disogrin | NOK | Merkel  |  Sitemap