"Your source for all your sealing needs since 1981."

Toll Free | 866.907.3129

P: 214.304.7103 | F: 214.503.9990

 



 

 

 

 

 

 
Home > Rotary Shaft Seals > OIl/Grease > Clipper
 

Clipper Oil & Split Seals

If you need assistance please click on the link and complete the form provided or contact one of customer services representatives who are ready and available to assist you with your Request For Quotation, Order Processing-Fulfillment, or assist you with material-seal recommendations.

Please call us at (866) 907-3129 for more information or assistance.

The Clipper Oil Seal design features an integrally molded rubber fiber outer case and an elastomeric seal lip. The unique, nonmetallic construction will not rust or corrode and forms a gasket-type seal between the equipment housing and the seal outside diameter (OD).

Clipper Split Seals are known for being the easiest split seal to install because they do not require a cover plate to keep them in the housing. The composite OD provides the best retention of any split seal available. Replacing failed seals in with Clipper Split Seals saves on downtime and lost production expenses.

Click each link below to expand the corresponding Product Information.

  • LUP, LPD, LDS Profiles

    LUP/LPD – General purpose spring-loaded single lip seal. Features nonmetallic composite OD for damage-free installation. LPD can be furnished with/without spring retainer feature.

    LDS – General purpose double lip features nonmetallic composite OD for damage-free installation. LDS profile has a primary spring-loaded lip with a non-spring-loaded secondary lip for exclusion of light dust or contamination.

    Application

    For oil and grease applications. Typical applications: electric motors, gearboxes, pumps, fans, runout table, work rolls, paper rolls, mixers and custom equipment.

    Operating Temperature Range
    NBR: -20 to 250 F (-29 to 121 C) FKM: -40 to 400 F (-40 to 204 C)

    Shaft Surface Speed
    LUP/LPD – Up to 3200 fpm (16.25 m/s) LDS – Up to 2500 fpm (12.7 m/s)

  • LUPW, LPDW, LDSW Profiles

    LUPW/LPDW – Spring-loaded single lip. Features nonmetallic composite OD for damage-free installation.

    LDSW – Specialized double lip features nonmetallic composite OD for damage-free installation. Primary lip features molded-in springs for lubrication retention. Springless secondary lip for excluding light dust. Floating lip accommodates high misalignment conditions.

    Application

    Most commonly used for oil or grease retention where high shaft misalignment is present. LUPW and LPDW accommodate misalignment by use of extended lip profile and may require a wider than normal bore depth to avoid interference of the lip. Type LDSW accommodates misalignment using a geometry that allows the lip to float with the shaft.

    Operating Temperature Range
    NBR: -20 to 250 F (-29 to 121 C) FKM: -40 to 400 F (-40 to 204 C)

    Shaft Surface Speed
    LUPW/LPDW – Up to 1000 fpm (5.1 m/s) LDSW – 2500 fpm (12.7 m/s)

    Important: For full listings of standard sizes, contact Industrial Seal Inc.

  • HP,MP Profiles

    HP – High pressure with a fluoroelastomer sealing element, outer metal case, and a PTFE backup element for pressure. Standard with carbon steel case. Stainless steel and other alloys available.

    MP – The standard MP is a rubber covered metal design, spring-loaded. Standard profile material FKM, other materials available upon request.

    Application

    HP –Applications: oil retention in rotary and oscillating pumps, compressors and custom equipment.
    MP – Applications: for oil pumps, compressors and custom equipment.

    Operating Temperature Range
    FKM: -40 to 400 F (-40 to 204 C)

    Shaft Surface Speed
    HP – Up to 4000 fpm (20.3 m/s) MP – Up to 4000 fpm (20.3 m/s)

  • OL Profile

    Outside Lip (OL) – Spring-loaded outside lip. Non-metallic composite ID for tight press fit on shaft. Easy to install.

    Application

    For positive retention of grease or oil in applications where where shaft is stationary and the seal housing rotates, such as as conveyors and agricultural and ground engaging equipment. Bore finish is critical since it serves as the dynamic sealing surface.

    Operating Temperature Range
    NBR: -20 to 250 F (-29 to 121 C) FKM: -40 to 400 F (-40 to 204 C)

    Shaft Surface Speed
    Up to 1000 fpm (5.1 m/s)

    Important: For full listings of standard sizes, contact Industrial Seal Inc.

  • ST-LUP, ST-LPD Profiles

    ST-LUP/ST-LPD – Spring-loaded single lip with heavy duty metal band inserted in composite OD. ST design features metal bands for absorbing shock load and greater bore retention. Spacer buttons are available for grease purging in applications requiring back-to-back sealing.

    Application

    For heavy duty applications, work rolls, paper rolls, backup rolls and custom equipment.

    Operating Temperature Range
    NBR: -20 to 250 F (-29 to 121 C)

    Shaft Surface Speed
    Up to 3200 fpm (16.3 m/s)

    Important: For full listings of standard sizes, contact Industrial Seal Inc.

  • TSS Profile

    TSS – Features nonmetallic composite OD for damage free installation. Soft flexible lip provides low friction sealing friction sealing contact to give extended service life.

    Application

    Typical applications: overhead cranes in steel mills, rotary drilling crown and travel blocks, draglines, hoists and elevators. Also used on mine cart wheels, flywheels and idler wheels.

    Operating Temperature Range
    NBR: -20 to 250 F (-29 to 121 C) FKM: -40 to 400 F (-40 to 204 C)

    Shaft Surface Speed
    Up to 2000 fpm (10.2 m/s)

    Important: For full listings of standard sizes, contact Industrial Seal Inc.

  • DL Profile

    TSS – Spring-loaded dual lip seal. Features nonmetallic composite OD for damage-free installation.

    Application

    Dual spring-loaded lips are used when the separation of two fluids is required. The design is also used for high contamination applications in keeping out a dirty environment.

    Operating Temperature Range
    NBR: -20 to 250 F (-29 to 121 C) FKM: -40 to 400 F (-40 to 204 C)

    Shaft Surface Speed
    Up to 2000 fpm (10.2 m/s)

    Important: For full listings of standard sizes, contact Industrial Seal Inc.

  • RPDT Profile

    Spring-loaded single lip seal. Features tapered heel. Available in splits only.

    Application

    Typical applications: pillow blocks.

    Operating Temperature Range
    NBR: -20 to 250 F (-29 to 121 C)

    Shaft Surface Speed
    Up to 2000 fpm (10.16 m/s)

    Important: For full listings of standard sizes, contact Industrial Seal Inc.

  • P, H Profiles

    P – Features nonmetallic composite OD for damage-free installation. The P wiper scraper lip extends outside the bore face.

    H – Features nonmetallic composite OD for damage-free installation. Shallow cavity rod wiper designed for excluding dust and contamination.

    Application

    P Wiper – Used in reciprocating applications.
    H Wiper – Used in reciprocating and rotary applications.

    Operating Temperature Range
    NBR: -20 to 250 F (-29 to 121 C) FKM: -40 to 400 F (-40 to 204 C)

    Shaft Surface Speed
    P Wiper – Up to 300 fpm reciprocating (1.5 m/s)
    H Wiper – Up to 300 fpm reciprocating (1.5 m/s), 2000 fpm
    rotary (10.2 m/s)

    Important: For full listings of standard sizes, contact Industrial Seal Inc.

  • SS, SDS Profiles

    SS – General purpose springless single lip seal. Features nonmetallic composite OD for damage-freeinstallation.

    SDS – General purpose springless dual lip. Features nonmetallic composite OD for damage-free installation.

    Application

    For grease retention and exclusion of light dust and fluids. Typical light duty applications.

    Operating Temperature Range
    NBR: -20 to 250 F (-29 to 121 C) FKM: -40 to 400 F (-40 to 204 C)

    Shaft Surface Speed
    Up to 2000 fpm (10.2 m/s)

    Important: For full listings of standard sizes, contact Industrial Seal Inc.

  • SS, SDS Profiles

    Clipper Sliptite – The Clipper Sliptite utilizes a layer of PTFE bonded to the sealing lip to reduce excessive wearing on the shaft and seal. Features nonmetallic composite OD.

    Application

    With the PTFE lip, the seal can be utilized in dry running applications, at higher speeds, and exhibits a broader range of chemical compatibility: electric motors, gearboxes, pumps, fans and custom equipment.

    Operating Temperature Range
    NBR: -20 to 250 F (-29 to 121 C) FKM: -40 to 400 F (-40 to 204 C)

    Shaft Surface Speed
    Up to 5000 fpm (25.4 m/s)

    Important: For full listings of standard sizes, contact Industrial Seal Inc.

  • TMAL, TMAS Profiles

    TMAL – Features a stainless steel outer case containing a machined PTFE spring-loaded sealing element.

    TMAS – Features a stainless steel outer case containing a machined PTFE non-spring-loaded sealing element.

    Application

    TMAL and TMAS seals are designed for corrosive chemical service and FDA application.

    Operating Temperature Range
    PTFE: -40 to 500 F (-40 to 260 C)

    Shaft Surface Speed
    Up to 2500 fpm (12.7 m/s)

    Important: For full listings of standard sizes, contact Industrial Seal Inc.

  • MIST Profile, LifeLine

    MIST – Heavy duty spring-loaded single lip. Features nonmetallic composite OD for damage-free installation. MIST features molded-in spring to eliminate spring dumping.

    STMIST – Heavy duty spring-loaded single lip. Features composite OD metal band reinforced construction for absorbing shock load and greater bore retention. STMIST features molded-in spring to eliminate spring dumping.

    LifeLine – Spring-loaded single lip features heavy duty rubber covered metal insert. LifeLine features metal insert for absorbing shock load and greater bore retention. LifeLine features molded-in spring to eliminate spring dumping.

    Application

    For heavy duty applications, work rolls, paper mills, backup rolls and custom equipment.

    Operating Temperature Range
    NBR: -20 to 250 F (-29 to 121 C)

    Shaft Surface Speed
    Up to 3200 fpm (16.3 m/s)

    Important: For full listings of standard sizes, contact Industrial Seal Inc.

  • RUP, RPD Profiles

    RUP/RPD – General purpose spring-loaded, single lip Features nonmetallic OD for damage-free installation. Available in solid or split.

    Splits – Feature a positive bore retention and require no cover plate.

    Application

    Typical applications: motors, gearboxes, pumps, fans, industrial rolls and custom equipment. Split seals are designed for applications where equipment is unable to be disassembled due to time constraints.

    Operating Temperature Range
    NBR: -20 to 250 F (-29 to 121 C) FKM: -40 to 400 F (-40 to 204 C)

    Shaft Surface Speed
    Up to 2000 fpm (10.2 m/s)

    Important: For full listings of standard sizes, contact Industrial Seal Inc.

    2017 All Rights Reserved.  Industrial Seal, Inc. 10460 Markison Road Dallas, Texas 75238 Tel: (866) 907-3129 Fax: (214) 503-9990 | Parker | Simrit | Disogrin | NOK | Merkel  |  Sitemap